SKU: WHI155-5475WS
Replacement steel wheel.
• 15" x 5"
• White spoke
• Please refer to the diagram below to ensure the correct bolt pattern is selected
• Powder coat finish
• 5 on 4.75" bolt pattern
• 2050lb weight capacity at 50psi
• Center cap not included
• Fits 1/2" studs
• 0 offset
• Pilot diameter is 3.30"
• Meets DOT specifications
• Not required to be balanced **When balancing the wheel must be mounted using the stud holes in the wheel not the pilot hole
To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.
To Determine Wheel Offset: Offset is the distance between the mounting face of the hub and the centerline of the rim. Inset: Refers to the distance when the mounting face is outboard of the rim centerline. Outset: Refers to the distance when the mounting face is inboard of the rim centerline. Please use the picture above. We are here to help if you have any questions.
© Redneck Trailer Supplies, 2016. All Rights Reserved.