Dexter Galvanized 10" x 2-1/4" Hub & Drum W/ 5 on 4.5" Bolt Pattern For 3,500lb Axles
Dexter galvanized hub & drum kits come with some of your main components like the inner and outer bearings. There is no need to worry about the races as they are already pressed into the hub for you. You will also get the grease seal, grease cap, and wheel nuts for the hub. This hub is designed for use with a #84 spindle. Each hub has a capacity of 1,750lbs. Spindle nut and spindle washer sold separately.
This kit comes with a galvanized hub. Galvanized hubs have a protective zinc coating to help prevent rusting.
Items in Kit:
• 1 L68149 Inner Bearing (1.378" ID)
• 1 L44649 Outer Bearing (1.063" ID)
• 1 L44610 Outer Race (Already Pressed In) 1.98" OD
• 1 L68111 Inner Race (Already Pressed In) 2.361" OD
• 1 10-19 Grease Seal (1.719" x 2.565")
• 1 21-41-1 Grease Cap (1.986" OD)
• 1 85-1 Grease Cap Plug
• 5 X1023R Coned Wheel Nuts
• 1 5 on 4.5" Galvanized Hub & Drum
• 1,750lb Capacity Per Hub & Drum
• Use with a 10" x 2-1/4" brake
To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.