Dexter Agricultural Hub Only W/ 6 on 6" Bolt Pattern For 5,200lb Axles
Dexter strives to provide the best in quality and value. There is no need to worry about the races as they are already pressed into the hub for you. The bearings, grease seal, grease cap, and wheel nuts for the hub are sold separately. This hub is designed for use with a #42 spindle. Each hub has a capacity of 3,000lbs. Spindle nut and spindle washer sold separately.
• Agricultural hubs are designed for low speed applications not to exceed 20 MPH
Items Sold Separately:
• 1 25580 Inner Bearing (1.75" ID)
• 1 LM67048 Outer Bearing (1.25" ID)
• 1 25520 Inner Race (Already Pressed In) 3.265"
• 1 LM67010 Outer Race (Already Pressed In) 2.328"
• 1 10-10 Grease Seal (2.125" x 3.376")
• 1 45896 Grease Cap (2.44")
• 6 LB569 Wheel bolts
• 1 6 on 6" Hub
• 3,000lb Capacity Per Hub
To determine the bolt circle on hubs or wheels with an even number of studs, measure center-to-center of studs directly across from each other on the diameter(bolt patterns are always measured in inches). Example: 8 on 6 1/2 would mean 8 studs with 6 1/2” center-to-center diameter.